Checking The Contents Of The Pack; Storing; Ups; Batteries - Alpha Technologies Tri Power X33 Mod HP series Operating And Maintenance Manual

Hide thumbs Also See for Tri Power X33 Mod HP series:

User manual (64 pages)

Table Of Contents

Table of Contents

4. Unpacking and assembly

4.3

Below is a list of the materials supplied. The list is general. Please refer to the packing list for shipment details.

TRI POWER X33 MOD HP INVERTER



Qty.1 Cabinet TRI POWER X33 MOD HP UPS;



QTy. 1 bag of acessories with set of srews for installing the unit correctly;



Qty.1 front closing panel;



Qty.2 base strips for side closing;



Qty. 1 Operating and maintenance manual;



Qty. 1 International guarantee.

TRI POWER X33 MOD HP BATTERY



Qty. 1 Cabinet TRI POWER X33 MOD HP BATTERY;



Qty. 1 Operating and maintenance manual;



Qty. 1 multicore cable for connecting to the UPS TRI POWER X33 MOD HP;



Qty. 1 bag containing fuses and keys for the front door.

Check that the UPS Tri Power X33 Mod HP technical data on the plate affixed on the inside panel of the door, inside the

hatch of the UPS, correspond to the material bought and described on the delivery document.

4.4

4.4.1 UPS

If the UPS is going to be stored prior to installation, regardless of whether or not it is still packed, it must be on dry, clean

and fresh premises where the ambient temperature is between 0°C and+50°C (32-122°F) and with humidity below 90%

(not condensing).

4.4.2 Batteries

The standard batteries of the UPS Tri Power X33 Mod HP are sealed lead-acid, they are maintenance-free and installed

internally.

Lead is a dangerous substance for the environment if it is not recycled by specialized companies.

If the batteries are not charged they cannot be kept for more than 6 months at 20°C (68°F) or more than 3 months at 30°

C (86°F) or more than 2 months at 35°C (95°F).

To charge the batteries before and after storing, simply connect the input power supply to the UPS, plug in the mains

switch and those of the battery (F B+ and F B-) and the bridge in the neutral switch and then close the switches.

When the unit detects the input voltage it automatically proposes starting a battery charging cycle. After about 1 minute

charging starts automatically and the time left to finish charging is shown on the display. The charging cycle can be stop-

ped at any time by pressing the 'ESC' key.

If the UPS is delivered without batteries, ALPHA is not liable for any damage or bad operation caused to it by an incorrect

wiring of the batteries.