Ip Filter Commands; Table 4-10. Ip Filter Commands - SMC Networks SMC8624/48T Management Manual

Command Usage
• You cannot set a null password. You will have to enter a password to
change the command mode from Normal Exec to Privileged Exec
with the enable command (page 4-26).
• The encrypted password is required for compatibility with legacy
password settings (i.e., plain text or encrypted) when reading the
configuration file during system bootup or when downloading the
configuration file from a TFTP server. There is no need for you to
manually configure encrypted passwords.
Example
Console(config)#enable password level 15 0 admin
Console(config)#
Related Commands
enable (4-26)

IP Filter Commands

Command
management
show management Displays the switch to be monitored or

Table 4-10. IP Filter Commands

Function
Configures IP addresses that are allowed
management access
configured from a browser
S M
YSTEM ANAGEMENT
C
OMMANDS
Mode Page
GC 4-38
PE 4-39
4-37