SMC Networks SMC8624/48T Management Manual page 368

C L
OMMAND INE
Default Setting
Default system mask: Filter inbound packets according to specified IP
ACLs.
Command Mode
Global Configuration
Command Usage
• A mask can only be used by all ingress ACLs or all egress ACLs.
• The precedence of the ACL rules applied to a packet is not determined
by order of the rules, but instead by the order of the masks; i.e., the
first mask that matches a rule will determine the rule that is applied to
a packet.
• You must configure a mask for an ACL rule before you can bind it to
a port or set the queue or frame priorities associated with the rule.
Example
Console(config)#access-list ip mask-precedence in
Console(config-ip-mask-acl)#
Related Commands
mask (IP ACL) (4-125)
ip access-group (4-129)
4-124
I
NTERFACE