Show Map Access-List Mac - SMC Networks SMC8624/48T Management Manual

C L
OMMAND INE
Command Usage
• You must configure an ACL mask before you can map CoS values to
the rule.
• A packet matching a rule within the specified ACL is mapped to one
of the output queues as shown below.
Priority
Queue
Example
Console(config)#int eth 1/5
Console(config-if)#map access-list mac M5 cos 0
Console(config-if)#
Related Commands
queue cos-map (4-260)

show map access-list mac (4-146)

show map access-list mac
This command shows the CoS value mapped to a MAC ACL for the
current interface. (The CoS value determines the output queue for packets
matching an ACL rule.)
Syntax
show map access-list mac [interface]
interface
ethernet unit/port
• unit - This is device 1.
• port - Port number.
Command Mode
Privileged Exec
4-146
I
NTERFACE
0 1
1 2
2 3 4
0 3 4
5 6 7
5 6 7