Event Logging Commands; Logging On; Table 4-14. Event Logging Commands - SMC Networks SMC8624/48T Management Manual

C L
OMMAND INE

Event Logging Commands

Command

logging on

logging history
logging host
logging facility
logging trap
clear logging
show logging
logging on
This command controls logging of error messages, sending debug or error
messages to switch memory. The no form disables the logging process.
Syntax
[no] logging on
Default Setting
None
Command Mode
Global Configuration
Command Usage
The logging process controls error messages saved to switch memory.
You can use the logging history command to control the type of error
messages that are stored.
4-58
I
NTERFACE

Table 4-14. Event Logging Commands

Function
Controls logging of error messages
Limits syslog messages saved to switch
memory based on severity
Adds a syslog server host IP address that will
receive logging messages
Sets the facility type for remote logging of
syslog messages
Limits syslog messages saved to a remote
server based on severity
Clears messages from the logging buffer
Displays the state of logging
Mode Page
GC 4-58
GC 4-59
GC 4-60
GC 4-61
GC 4-62
PE 4-62
PE 4-63