Time Commands; Table 4-16. Time Commands - SMC Networks SMC8624/48T Management Manual

C L
OMMAND INE
Example
Console#show logging sendmail
SMTP servers
-----------------------------------------------
192.168.1.19
SMTP minimum severity level: 7
SMTP destination email addresses
-----------------------------------------------
ted@this-company.com
SMTP source email address: bill@this-company.com
SMTP status: Enable
Console#

Time Commands

The system clock can be dynamically set by polling a set of specified time
servers (NTP or SNTP), or by using information broadcast by local time
servers.
Command
sntp server
sntp poll
sntp client
sntp broadcast
client
show sntp
clock timezone
calendar set
show calendar
4-70
I
NTERFACE

Table 4-16. Time Commands

Function
Specifies one or more time servers
Sets the interval at which the client polls for
time
Accepts time from specified time servers
Accepts time from any time broadcast server GC
Shows current SNTP configuration settings
Sets the time zone for the switch's internal
clock
Sets the system date and time
Displays the current date and time setting
Mode Page
GC 4-71
GC 4-72
GC 4-72
4-74
NE, 4-74
PE
GC 4-75
PE 4-76
NE, 4-76
PE