Table of Contents
Advertisement
Command Usage
• The system prompts for data required to complete the copy
command.
• The destination file name should not contain slashes (\ or /), the
leading letter of the file name should not be a period (.), and the
maximum length for file names on the TFTP server is 127 characters
or 31 characters for files on the switch. (Valid characters: A-Z, a-z, 0-9,
".", "-", "_")
• Due to the size limit of the flash memory, the switch supports only
two operation code files.
• The maximum number of user-defined configuration files depends on
available memory.
• You can use "Factory_Default_Config.cfg" as the source to copy
from the factory default configuration file, but you cannot use it as the
destination.
• To replace the startup configuration, you must use startup-config as
the destination.
• For information on specifying an https-certificate, see "Replacing the
Default Secure-site Certificate" on page 3-40. For information on
configuring the switch to use HTTPS/SSL for a secure connection,
see "ip http server" on page 4-41.
F
/F
C
LASH
ILE
OMMANDS
4-87
Advertisement
Table of Contents
