Dot1X Timeout Re-Authperiod; Dot1X Timeout Tx-Period - SMC Networks SMC8624/48T Management Manual

C L
OMMAND INE
Command Mode
Global Configuration
Example
Console(config)#dot1x timeout quiet-period 350
Console(config)#

dot1x timeout re-authperiod

This command sets the time period after which a connected client must be
re-authenticated.
Syntax
dot1x timeout re-authperiod seconds
no dot1x timeout re-authperiod
seconds - The number of seconds. (Range: 1-65535)
Default
3600 seconds
Command Mode
Global Configuration
Example
Console(config)#dot1x timeout re-authperiod 300
Console(config)#

dot1x timeout tx-period

This command sets the time that the switch waits during an authentication
session before re-transmitting an EAP packet. Use the no form to reset to
the default value.
Syntax
dot1x timeout tx-period seconds
no dot1x timeout tx-period
seconds - The number of seconds. (Range: 1-65535)
4-110
I
NTERFACE