Configuring Private Vlans; Pvlan; Table 4-43. Private Vlan Commands - SMC Networks SMC8624/48T Management Manual

Configuring Private VLANs

Private VLANs provide port-based security and isolation between ports
within the assigned VLAN. This section describes commands used to
configure private VlANs.
Command

pvlan

show pvlan
pvlan
This command enables or configures a private VLAN. Use the no form to
disable the private VLAN.
Syntax
pvlan [up-link interface-list down-link interface-list]
no pvlan
• up-link – Specifies an uplink interface.
• down-link – Specifies a downlink interface.
Default Setting
No private VLANs are defined.
Command Mode
Global Configuration
Command Usage
• A private VLAN provides port-based security and isolation between
ports within the VLAN. Data traffic on the downlink ports can only
be forwarded to, and from, the uplink port.
• Private VLANs and normal VLANs can exist simultaneously within
the same switch.

Table 4-43. Private VLAN Commands

Function
Enables and configured private
VLANS
Displays the configured private
VLANS
VLAN C
OMMANDS
Mode Page
GC 4-248
PE 4-249
4-248