SMC Networks SMC8624/48T Management Manual page 257

Command Group
SNMP
Interface
Mirror Port
Rate Limiting
Link Aggregation
Address Table
Spanning Tree
VLANs
GVRP and
Bridge Extension
Priority
Multicast Filtering
IP Interface
Table 4-4. Command Group Index
Description
Activates authentication failure traps; configures
community access strings, and trap managers; also
configures IP address filtering
Configures the connection parameters for all
Ethernet ports, aggregated links, and VLANs
Mirrors data to another port for analysis without
affecting the data passing through or the
performance of the monitored port
Controls the maximum rate for traffic transmitted
or received on a port
Statically groups multiple ports into a single logical
trunk; configures Link Aggregation Control
Protocol for port trunks
Configures the address table for filtering specified
addresses, displays current entries, clears the table,
or sets the aging time
Configures Spanning Tree settings for the switch
Configures VLAN settings, and defines port
membership for VLAN groups; also enables or
configures private VLANs and protocol VLANs
Configures GVRP settings that permit automatic
VLAN learning; shows the configuration for the
bridge extension MIB
Sets port priority for untagged frames, selects strict
priority or weighted round robin, relative weight
for each priority queue, also sets priority for TCP
traffic types, IP precedence, and DSCP
Configures IGMP multicast filtering, query
parameters, and specifies ports attached to a
multicast router
Configures IP address for the switch
C G
OMMAND ROUPS
Page
4-149
4-167
4-183
4-185
4-187
4-200
4-205
4-231
4-250
4-255
4-272
4-284
4-13