Logging Trap; Clear Logging - SMC Networks SMC8624/48T Management Manual

C L
OMMAND INE

logging trap

This command enables the logging of system messages to a remote server,
or limits the syslog messages saved to a remote server based on severity.
Use this command without a specified level to enable remote logging. Use
the no form to disable remote logging.
Syntax
logging trap [level]
no logging trap
level - One of the level arguments listed below. Messages sent
include the selected level up through level 0. (Refer to the table on
page 4-59.)
Default Setting
Level 3 - 0
Command Mode
Global Configuration
Example
Console(config)#logging trap 4
Console(config)#

clear logging

This command clears messages from the log buffer.
Syntax
clear logging [flash | ram]
• flash - Event history stored in flash memory (i.e., permanent
memory).
• ram - Event history stored in temporary RAM (i.e., memory
flushed on power reset).
Default Setting
Flash and RAM
4-62
I
NTERFACE