Spanning Tree Commands - SMC Networks SMC8624/48T Management Manual

C L
OMMAND INE

Spanning Tree Commands

This section includes commands that configure the Spanning Tree
Algorithm (STA) globally for the switch, and commands that configure
STA for the selected interface.
Command
spanning-tree
spanning-tree mode
spanning-tree
forward-time
spanning-tree hello-time Configures the spanning tree bridge
spanning-tree max-age
spanning-tree priority
spanning-tree
path-cost method
spanning-tree
transmission-limit
spanning-tree
mst-configuration
mst vlan
mst priority
name
revision
max-hops
4-205
I
NTERFACE
Table 4-37. Spanning Tree Commands
Function
Enables the spanning tree protocol
Configures STP, RSTP or MSTP mode GC
Configures the spanning tree bridge
forward time
hello time
Configures the spanning tree bridge
maximum age
Configures the spanning tree bridge
priority
Configures the path cost method for
RSTP/MSTP
Configures the transmission limit for
RSTP/MSTP
Accesses MSTP configuration mode
Adds VLANs to a spanning tree
instance
Configures the priority of a spanning
tree instance
Configures the name for the multiple
spanning tree
Configures the revision number for the
multiple spanning tree
Configures the maximum number of
hops allowed in the region before a
BPDU is discarded
Mode Page
GC 4-206
4-207
GC 4-209
GC 4-210
GC 4-210
GC 4-211
GC 4-212
GC 4-213
GC 4-213
MST 4-214
MST 4-215
MST 4-216
MST 4-217
MST 4-218