Simuline Cycraft Installation & User Manual page 7

6. OPERATION & ADJUSTMENT INSTRUCTION
6.1 DESCRIPTION OF INDICATORS AND SWITCHES ON THE OPERATION
PANEL
6.2 TURNING THE POWER ON AND OFF
6.3 ADJUSTMENT OF THE SPEAKER VOLUMES
6.4 SETTING VIDEO MONITOR PARAMETERS
6.5 USING THE LCD PANEL TO SET CONFIGURATIONS
6.5.1 SETTING THE SAFETY SENSOR PARAMETERS
6.5.2 SETTING TCP/IP CONFIGURATION
6.5.3 VIEWING THE TOTAL COIN COUNT (STATISTICS)
6.6 SETTING THE COIN AND CREDIT CONFIGURATION
6.7 GAME PLAY OPERATION
7. MAINTENANCE & INSPECTION INSTRUCTION
7.1 ROUTINE MAINTENANCE
7.2 INSPECTION OF CRITICAL BOLTS AND CONNECTIONS
7.3 VERIFICATION OF SNAP RINGS
7.4 CHECKING WELD CONDITION
7.5 CHECKING THE ACTUATOR DRIVE BELT
7.6 CLEANING THE MSCU AIR FILTERS AND FAN
7.7 LUBRICATING THE ACTUATORS
7.8 LUBRICATING THE JOINTS
8. SERVICE & REPLACEMENT INSTRUCTION
8.1 EXCHANGING THE COMPACT FLASH CARD
8.2 REPLACEMENT OF SERVO CONTROLLER BOARD
9. TROUBLE SHOOTING
9.1 TROUBLESHOOTING TABLE
9.2 CONTROLLER ERROR MESSAGE TABLE
10. ELECTRIC SCHEMATICS
10.1 SCU SCHEMATIC
10.2 CABIN SCHEMATIC
10.3 MCU SCHEMATIC
Page 7