Simuline Cycraft Installation & User Manual page 66

Compact
Flash Card
To re-install the compact flash card, follow the above process in reverse.
Once the compact flash card is removed, it can be sent to the manufacturer for
analysis. Another way is to plug the compact flash card into a compact flash card
reader connected to a PC and copy the file named MCUErr.log. This file can then
be sent to the manufacturer for analysis.
Do not attempt to take out or access the compact flash card unless instructed to do so
by the distributor or manufacturer.
8.2 REPLACEMENT MSCU COMPONENTS AND BOARDS
Turn off the power and disconnect the supply power before servicing.
This unit is to be serviced by trained personnel only.
1) The following pictures show the location of major modules, components and
boards in the MSCU.
accessed or replaced.
should carry out replacement work. Replacement procedures of components and
parts are mostly straight forward. However, if any questions arise or additional
information is required, contact your distributor or Simuline Inc.
Main power must be disconnected before any part is
Only qualified maintenance personnel or serviceman
Page 66