Appendix B.8 Change Web Server Security Settings After Initial Setup; Figure 36: Fs-Gui Landing Screen - SMC Networks Lochinvar ProtoNode Startup Manual

Appendix B.8 Change Web Server Security Settings After Initial Setup

•
Type the IP Address of the ProtoCessor into the web browser or use the FieldServer Toolbox to
connect to the ProtoCessor, then login to the FieldServer.
•
Click on the Diagnostics tab at the top of the screen, then click on View in the navigation panel,
and then on Connections.
•
Click Setup in the Navigation panel.

Figure 36: FS-GUI Landing Screen

Page 39 of 56
Lochinvar ProtoNode Start-up Guide