Sartorius Talent Operating Instructions Manual page 5

Setting up the Balance/Scale
Balances/Scales with an Analytical Draft Shield
G Place the components listed below inside
the chamber in the order given:
– Shield plate
– Shield ring
– Pan support
– Weighing pan
– Gem tray (only with GD models)
Balances/Scales with a Round Weighing Pan
G Place the components listed below inside
the chamber in the order given:
– Pan support
– Weighing pan
– Gem tray (only with GE models)
Balances/Scales with a Rectangular Weighing Pan
G Place the weighing pan on the balance/scale
G Gem tray (only with GE models)
Connecting the Balance/Scale to AC Power/
Safety Precautions
Use only original Sartorius AC adapters:
– for Europe: 6971948
G Insert the right-angle plug into the jack
G Plug AC adapter into electrical outlet
The ground terminal is connected to the balance/scale
housing, which can be additionally grounded for
operation.
5