Table of Contents
Advertisement
Contents
2
Contents
2
3
4
7
7
8
10
10
11
12
13
14
15
15
16
18
20
21
22
23
24
24
26
28
30
33
EC Type-approval Certificate
34
Plates and Markings
2
Warnings and
Safety Precautions
Safety
G To prevent damage to the equipment,
please read these operating instructions
carefully before using your balance/scale.
! Do not use this balance/scale in a hazardous
area/location.
! Use only commercially available
non-rechargeable or rechargeable batteries:
8+ AA, Mignon
! Make absolutely sure to unplug the
balance/scale from AC power before you con-
nect or disconnect a peripheral device.
! Exposure to excessive electromagnetic
disturbance can cause the readout value to
change. Once the disturbance has ceased, the
instrument can be used again in accordance
with its intended use.
Setting up the Balance/Scale
! Warning when using pre-wired RS-232
connecting cables: The pin assignments
in RS-232 cables purchased from other
manufacturers may be incompatible with
Sartorius balances/scales. Be sure to check
the pin assignment against the chart
on page 20 before connecting the cable,
and disconnect any lines that do not match.
- Connect only Sartorius accessories and
options, as these are optimally designed for
use with your Sartorius balance/scale.
Do not try to solve any problems on your own.
The operator shall be responsible for any mod-
ifications to Sartorius equipment and for any
connections of cables or equipment not sup-
plied by Sartorius and must check and, if nec-
essary, correct these modifications and con-
nections. On request, Sartorius will provide
information on the minimum operating speci-
fications (in accordance with the standards
for defined immunity to interference).
- Do not open the balance/scale housing.
If the seal is broken, this will result
in forfeiture of all claims under the
manufacturer's warranty.
Hide quick links:
Advertisement
Table of Contents
