Technical Specifications - Owon VDS Series User Manual

(4) Click "Connect".
IV. Technical Specifications
Unless otherwise specified, the technical specifications applied are for VDS series only, and Probes attenuation set as 10X. Only if the
oscilloscope fulfills the following two conditions at first, these specification standards can be reached.
This instrument should run for at least 30 minutes continuously under the specified operating temperature.
If change of the operating temperature is up to or exceeds 5℃, do the "Self Cal" procedure in Utility menu
(see Self Cal).
Note: VDS1022(I) represents two types of machines, they are VDS1022I and VDS1022. VDS1022I contains isolation, while VDS1022 does
not contain isolation. The same as VDS2052(I).
Performance Characteristics
Bandwidth
Channel
Mode
Acquisition
Sample rate
(real time)
Instruction
VDS1022(I) 25MHz
VDS2052(I) 50MHz
VDS2062 60MHz
VDS3102 100MHz
VDS2064 60MHz
VDS3104 100MHz
VDS1022(I)
VDS2052(I)
2 + 1 (*External)
VDS2062
VDS3102
VDS2064
4 + 1 (*External)
VDS3104
Normal, Peak detect, Averaging
Dual CH 100MS/s
VDS1022(I)
Single CH 100MS/s
Dual CH 250MS/s
VDS2052(I)
Single CH 250MS/s
Dual CH 250MS/s
VDS2062
Single CH 500MS/s
Dual CH 500MS/s
VDS3102
Single CH 1GS/s
VDS2064 Four CH 125MS/s
32