Operating Instructions
TSZ-UNI
4 General
4.1
Authorized use
The device (TSZ-uni) is specially designed for gripping, transporting and the following laying of gripping goods
such as, steps, kerb stones, contact angle, L-stones, as well ashlar rocks (via the assembly of the accessories
"steelfinger grippers WB-SQ") in conjunction with a corresponding lifting device (e.g. excavator).
This device is series-produced equipped with the following elements:
suspension lug for the crane hook (lifting equipment operation)
handles for the guidance of the device
automatic release for the fully automatic switch over from „full" to "empty" .
exchangeable rubber bars (as gripping elements)
Accessories:
●
steelfinger grippers WB-SQ (43101110) for movements of roughly-cut ashlar rocks .
●
Height adjustable support (for gripping in batch operation)
●
The device is only designed for the use specified in this documentation.
●
Every other use is not authorized and is forbidden!
●
All relevant safety regulations, corresponding legal regulations, especially regulations of the declaration of
conformity, and additional local health and safety regulations have to be observed.
Prior to every operation the user must ensure that:
●
the equipment is suited to the intended operation, the functioning and the working condition of the
equipment is examined, and the loads are suitable to be handled.
Any doubts about instructions should be raised with the manufacturer prior to use.
ATTENTION: The use of this device is only permitted in proximity to the ground.
9 / 22
General
V4
GB
Need help?
Do you have a question about the TSZ-UNI and is the answer not in the manual?
Questions and answers