General; Authorized Use; Survey And Construction - probst PW-III Operating Instructions Manual

Table of Contents

Advertisement

Available languages

Available languages

General

2
General
2.1

Authorized use

The device pallet cart (PW-III) exclusively suitable for transporting of stone slabs (on pallets) on a building
site (on even ground). Underride the pallets sidewise.
The device (PW-III) may only be used on sloping locations with not more than 15° (slope) and if the
conditions on the area allows a safety handling with this device.
The ground must be able to carry the full weight.
The device (PW-III) can set by itself on sloping locations and cause considerable damages, if it is not
sufficiently fixed.
The permissible working load limit (WLL) must not be exceeded.
The device (PW-III) is equipped with no parking brake.
For this reason it is absolutely necessary that the device is fixed with sloping location additionally with
brake blocks.
When lowering the load pay attention. Danger of squeezing the feet!
Therefore, always keep distance. In particular, children are at risk.
NOT ALLOWED ACTIVITIES:
Unauthorized alterations of the device and the use of any self-made additional equipment could cause
danger and are therefore forbidden!
Never exceed the carrying capacity/working load limit (WLL) and the nominal width/nominal size
of the device.
All unauthorized transportations with the device are not allowed:
Transportation of people and animals.
Transportation of other loads and materials than described in this manual.
Never suspend any goods with ropes, chains or similar at the device.
The device is only designed for the use specified in this documentation.
Every other use is not authorized and is forbidden!
All relevant safety regulations, corresponding legal regulations, especially regulations of the
declaration of conformity, and additional local health and safety regulations must be observed.
Prior to every operation the user must ensure that:
The equipment is suited to the intended operation
the functioning and the working condition of the equipment is examined
the load is suitable to be handled.
Any doubts about instructions should be raised with the manufacturer prior to use.
2.2

Survey and construction

51100011
4 / 12
GB

Advertisement

Table of Contents
loading

Table of Contents