Personal Safety Requirements; Protective Equipment; Accident Prevention; Function Control - probst TSZ-UNI Operating Instructions Manual

Operating Instructions
TSZ-UNI
3.5

Personal safety requirements

●
Each operator must have read and understood the operating instructions.
●
Only qualified, authorized personal is allowed to operate the device and all devices which are connected
(lifting equipment).
●
The manual guiding is only allowed for machines with handles.
3.1

Protective equipment

The protective equipment must consist, according to the safety regulations of
the following parts:
3.2

Accident prevention

●
The workplace has to be covered for unauthorized persons, especially children.
●
Take care in case of thunderstorm!
●
The workplace has to be sufficiently illuminated.
●
Take care with handling wet, dirty and not solidified components.
●
The working with the device in case of atmospheric editions under 3° C (37,5° F) is forbidden!
Because the goods could be fall down caused by dampness or freezing.
3.3

Function Control

3.3.1

General

●
Before using the device check the functions and the working condition.
●
Maintenance and lubrication are only permitted when device is shut down!
●
Do not use the device, until all faults which can cause safety hazards are removed.
●
If there are any cracks, splits or damaged parts on any parts of the device, immediately stop using it.
●
The operating instructions must be available at the workplace every time.
●
Do not remove the data-plates of the machine.
●
Unrecognisable information signs must be replaced.
7 / 22
Safety
V4
●
Protective clothing
●
Safety gloves
●
Safety shoes
GB