Personal Safety Requirements; Protective Equipment; Accident Prevention; Function Control - probst TAS-UNI-450 Operating Instructions Manual

Safety
1.4

Personal safety requirements

Each operator must have read and understood the operating instructions (and all safety instructions).
Only qualified, authorized personal is allowed to operate the device and all devices which are
connected (lifting device/carrier).
The manual guiding is only allowed for devices with handles.
Otherwise there is a risk of injury to the hands!
1.5

Protective equipment

The protective equipment must consist, according to the safety
regulations of the following parts:
1.6

Accident prevention

•
The workplace has to be covered for unauthorized persons, especially children.
•
Caution at thunderstorm - danger of lightning!
Depending on the intensity of the thunderstorm, stop working with the device if necessary.
•
The workplace must be sufficiently illuminated.
•
Be careful with wet, frozen, iced and dirty building materials! There is a danger of the
gripping material slipping out. → DANGER OF ACCIDENT!
1.7

Function Control

1.7.1 General

•
Before every usage of the device check the functions and the working condition.
•
Maintenance and lubrication are only permitted when device is shut down!
•
Do not use the device, until all faults which can cause safety hazards are removed.
•
If there are any cracks, splits or damaged parts on any parts of the device, immediately stop using
it.
•
The operating instructions must be available at the workplace every time.
•
Do not remove the type plate of the machine.
•
Unrecognisable information signs (such as regulatory or prohibition signs) must be replaced.
51000100 / 51000101 4 / 19
•
Protective clothing
•
Safety gloves
•
Safety shoes
GB