Electromagnetic Compatibility (EMC-Directive)
The operating of inverters in the European market is only permitted if the Council
CAUTION
Directive Electromagnetic Compatibility 89/336/EWG has been observed.
It is the responsibility of the manufacturer of the machine or system to observe the
immunity and emission limits, requested by the Council Directive EMC in the European
market. Guidelines for the installation according EMC-regulations - as shielding,
grounding, filter arrangement as well as wiring instructions - are summarized in
Appendix A, 'CE-Conformance' of this Instruction manual.
Hot Surface
This sign on the faceplate of the inverter alerts a person that high temperature is
WARNING
present.
Do not touch the heatsink surface during operation of the drive or short after
disconnecting.
1-2
1 - INTRODUCTION
GV3000/SE
49'1327 e