Appendix C Compliance With Electromagnetic Compatibility Standards - Reliance electric 2V4160 Hardware Installation And Troubleshooting Manual

C.1 Introduction
This appendix provides information on the GV3000/SE drive's compliance with
European community electromagnetic compatibility standards and covers the
following:
•
•
•
The GV3000/SE drives listed on the Declaration of Conformity (DOC) and in table C.1
have been tested and are in compliance with the following standards when installed
with the appropriate AC Mains Filter:
•
•
•
•
Note that the conformity of the GV3000/SE drive to the above standards does not
guarantee that the entire installation will be in conformance.
Copies of the Declaration of Conformity (DOC) may be obtained by contacting the
Rockwell AutoFax service at 440-646-7777.
Compliance with Electromagnetic Compatibility Standards
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Compliance with Electromagnetic
requirements for standards compliance
guidelines on installing the AC Mains Filter
instructions on how the drive must be wired.
EN50081-1 (1992)
Electromagnetic compatibility - Generic emission standard
Part 1: Residential, commercial, and light industrial
EN50081-2 (1992)
Electromagnetic compatibility - Generic emission standard
Part 2: Industrial
EN50082-1 (1992)
Electromagnetic compatibility - Generic immunity standard
Part 1: Residential, commercial, and light industrial
EN50082-2 (1995)
Electromagnetic compatibility - Generic immunity standard
Part 2: Industrial
A
PPENDIX
Compatibility Standards
C
C-1