Danfoss VLT HVAC Basic Drive FC 101 Quick Manual page 42

Programming
5.
Press [
setting.
6. Press [OK] to accept the change.
7. Press either [Back] twice to enter Status, or press
[Menu] once to enter the Main Menu.
The Main Menu accesses all parameters.
4 4
1. Press the [Menu] key until indicator in display is
placed above Main Menu.
2.
Press [
groups.
3. Press [OK] to select a parameter group.
4.
Press [
in the specific group.
5. Press [OK] to select the parameter.
6.
Press [
40
VLT®HVAC Basic Drive FC 101
▲ ▼
] [ ] to change the value of a parameter
▲ ▼
] [ ] to browse through the parameter
▲ ▼
] [ ] to browse through the parameters
▲ ▼
] [ ] to set/change the parameter value.
Danfoss A/S © 08/2014 All rights reserved. MG18A622