Power-Saving Mode (Standby) - EWM Tetrix 352 Synergic Operating Instructions Manual
Hide thumbs
Also See for Tetrix 352 Synergic:
- Operating instructions manual (81 pages) ,
- Operating instructions manual (94 pages)
Table of Contents
Advertisement
Design and function
Menus and sub-menus on the machine control
5.23.3 Power-saving mode (Standby)
You can activate the power-saving mode by either pressing the push-button for a prolonged time or by
setting a parameter in the machine configuration menu (time-controlled power-saving mode).
When power-saving mode is activated, the machine displays show the horizontal digit in the
centre of the display only.
Pressing any operating element (e.g. tapping the torch trigger) deactivates power-saving mode and the
machine is ready for welding again.
- See 4.4 Machine control (Mode RC - off) chapter
- See 5.24 Machine configuration menu chapter
72
099-000141-EW501
12.01.2016
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Tetrix 352 Synergic and is the answer not in the manual?