Resetting Jobs 1-128 To The Factory Setting (Reset All Jobs); Exit Job Manager Without Changes - EWM Tetrix 352 Synergic Operating Instructions Manual

Design and function
Organising welding tasks (Mode "JOB Manager")

5.20.5 Resetting JOBs 1-128 to the factory setting (Reset All JOBs)

Operating Action
element
2 sec.

5.20.6 Exit JOB Manager without changes

The user is in the JOB manager menu and wants to exit without making any changes:
Operating Action
element
2 sec.
56
Result
Select JOB Manager mode
x x
Select JOB Manager mode
Switch from "Load JOB" to "Reset All JOBs"
3 x
• ON = Reset all JOBs to factory settings
• OFF = Do not reset JOBs
All JOBs reset to factory settings, machine
switches back to Display mode.
1 x
Result
Machine switches back to Display mode
The JOB can be adjusted individually.
Display
Press until the "VOLT"
signal light is on
Current value and JOB
number displayed
Display
Current value and JOB
number displayed
099-000141-EW501
12.01.2016