EWM Tetrix 352 Synergic Operating Instructions Manual page 23

Item Symbol
sec
11
12
13
14
099-000141-EW501
12.01.2016
Machine description – quick overview
Description 0
Gas post-flow time (TIG)
Setting ranges: 0.00 sec to 40.0 sec (0.1 sec increments).
Balance
TIG kHz-pulsing (metallurgical pulsing)
Setting range: 1% to +99% (increments of 1%)
MMA pulse welding
Setting range: 1% to +99% (increments of 1%)
Frequency
TIG kHz-pulsing (metallurgical pulsing)
Setting range: 0.05 kHz to 15 kHz
MMA pulse welding
Setting range: 0.2 Hz to 500 Hz
activArc TIG welding process
• Switch activArc on or off
• Correct the activArc characteristic (setting range: 0 to 100)
Machine control (Mode RC - on)
23