What Is Remote Office 9150 - Nortel Remote Office 9150 Installation And Administration Manual

Remote Office 9150 description

What is Remote Office 9150?

Remote Office 9150 is a product that provides full-featured host PBX services to
as many as 32 users located in your office.
The Remote Office 9150 unit uses the Voice over IP technology to route voice
conversation and phoneset control signals between your office and the host PBX
over your existing IP data network.
The Remote Office 9150 unit can also use the PSTN to route calls if
n
the voice QoS degrades below predefined thresholds
In this case, Nortel Networks' patented QoS transitioning technology
automatically transitions calls to the PSTN when the voice QoS degrades.
Calls transition back to the IP network when the QoS returns to normal.
n
you are not yet ready to use the IP network to route voice calls
You can configure the Remote Office 9150 unit to use only the PSTN, and
implement the IP network functionality when you are ready.
This section provides a brief description of each component used in a Remote
Office 9150 system.
Reach Line Card
The Reach Line Card (RLC) is installed in the PBX at the host location. The
RLC provides service for up to 16 ports on a 1-slot card, or 32 ports on a 2-slot
card. It emulates a standard digital line card (XDLC), providing PBX
functionality for telephones at remote locations (including sites using the
Remote Office 9150 unit).
The RLC relays voice and signaling information between the digital telephones
connected at the Remote Office 9150 site to the PBX at the host site. Like the
Remote Office 9150 unit, the RLC can route calls over the IP network or the
PSTN, or both when the QoS transitioning technology feature is configured.
For a more detailed description, refer to the Reach Line Card Installation and
Administration Guide (NTP 555-8421-210).
8
Standard 2.0
Remote Office 9150