Closing Configuration Manager - Nortel Remote Office 9150 Installation And Administration Manual

Configuration Manager overview

Closing Configuration Manager

When you have completed all the configuration modifications you want to
make, or are done viewing unit logs and statistics, close the Configuration
Manager application. This secures the configuration, preventing others from
accessing it if you walk away from the administration PC while logged on to a
unit.
To close Configuration Manager
.
1 Ensure that you have saved all configuration changes by doing one or more
of the following:
n From the menu, choose File
the configuration file. The file is saved on the administration PC hard
disk.
n Update the flash memory of the unit to which you are connected by
doing one of the following:
n Click Send on any property sheet, and then choose Upload/
n Click Send All on any property sheet, and then choose
n If you have saved the changes to a file, choose
180
CAUTION
Risk of configuration loss
If you close Configuration Manager without saving the changes
you made to a file on your PC, or without updating the flash
memory of the unit you were working on, all changes are lost. You
must reenter any changes you made.
Download Save to Flash.
Upload/Download
Upload/Download
For instructions, see "Restoring the configuration" on page 268.
Save As, and then specify the name for
Save to Flash.
Upload Configuration.
Standard 2.0
Remote Office 9150