Nortel Remote Office 9150 Installation And Administration Manual page 211

September 2001
Field
SPRE Codes: Online
SPRE Codes: Paging
SPRE Codes: Registration
SPRE Codes: Offline
Installation and Administration Guide
Description
Enter the SPRE code that is used to put your site into
online mode, or accept the default. The default is #99.
Note: The SPRE code is automatically prefixed with the
pound sign (# in North America). This means users must
dial # before the SPRE code when going into online mode.
Maximum length: 3 digits in addition to the pound sign.
Refer to "Online/offline table" on page 46 for more
information.
Enter the SPRE code that is used to announce pages to
other stations in your office, or accept the default code.
The default is #05.
Note: The SPRE code is automatically prefixed with a
pound sign (#). This means users must dial # before the
SPRE code when initiating a page.
Maximum length: 3 digits in addition to the pound sign
Enter the SPRE code that allows a multi-user or port-
sharing participant to begin a session, or accept the default
code. The default is #97.
Note: The SPRE code is automatically prefixed with a
pound sign (#). This means users must dial # before the
SPRE code when registering for a port.
Maximum length: 3 digits in addition to the pound sign
Enter the SPRE code that is used to put your site into
offline mode, or accept the default code. The default is
#98.
Note: The SPRE code is automatically prefixed with the
pound sign (# in North America). This means users must
dial # before the SPRE code when going into offline mode.
Maximum length: 3 digits in addition to the pound sign
Configuring the Remote Office 9150 unit
187