Nortel Remote Office 9150 Installation And Administration Manual page 467

September 2001
Statistic
LOG NUMBER
DESCRIPTION
SEVERITY
TASK
PRODUCT
CANCELLATION
ACTION TO BE TAKEN
PARAMETERS
DISPLAYED TEXT
Installation and Administration Guide
Definition
82
This log indicates that Network Manager task states for a particular
remote unit got reset and all the connections to the remote are
cleared. This can happen due to the following reasons:
1) An error occurred in the system to automatically trigger Network
Manager reset
2) User has issued a debug command "nmr x" where x is a valid
remote unit number.
MAJOR
Network Manager
RLC, 9150, 911x
None
System should work normally after the log is displayed. If not,
contact Technical support personal for help. If the log is displayed
too frequently, check if anyone is entering debug commands. If not,
contact technical support.
Remote unit
States reset in NM for Remote: P1
Display log definitions
443