Working With Configuration Files - Nortel Remote Office 9150 Installation And Administration Manual

September 2001

Working with configuration files

This section explains how to
n
create a configuration file (see page 164)
n
open a configuration file in Configuration Manager (see page 165)
n
perform a configuration upload (see page 166)
n
perform a configuration download (see page 166)
When to use the Configuration Manager file operations
You can use
OK, File
File Save As
one of the following:
n
Send
n
Send All
n
Retrieve
n
Upload
Configuration
n
Download
Configuration
Installation and Administration Guide
When you are
Open, and working in offline mode
or
connected and logged on to a unit.
Note: When working in offline mode, you must save
the configuration to a file. However, when you are
connected and logged on to a unit, the file save
operation is optional when you use Send or Send All to
update the unit's flash memory.
connected and logged on to a unit.
Configuration Manager overview
163