Nortel Remote Office 9150 Installation And Administration Manual page 160

Installing the Remote Office 9150 unit
11 Do the following:
IF you are performing an
offline configuration
online configuration
136
THEN
1 Click Save to File.
Result: You are prompted to specify the
directory path and file name for the
configuration file.
2 Specify the directory path and file name
for this configuration.
Note: The file name is automatically
defaulted with the name you entered as
the node name.
3 Ensure the Files of type box shows Text
File(*.TXT).
4 Click Save to complete the Save to File.
Result: The file is saved, and then you are
asked if you want to configure another
board. If you do, click Yes, and continue
with step 3 on page 130.
The information in this file can be opened in
Configuration Manager, and then sent to and
saved in the Remote Office 9150 unit's flash
memory at another time. For instructions,
refer to "Working with configuration files" on
page 163.
1 Click Save to Flash.
Result: The information entered is written
to the flash memory of the Remote Office
9150 unit you are configuring.
If successful, the following message
appears:
Data Sent Successfully
Note: Nortel Networks recommends that
you also save the configuration to a file.
2 Restart the Remote Office 9150 unit.
Standard 2.0
Remote Office 9150