Sample configuration files
Remote Office 9150 unit
This section shows the configuration settings for the Remote Office 9150 unit.
You can obtain a similar configuration printout by performing a configuration
download while connected to the Remote Office 9150 unit.
Note: Configuration settings are separated by commas (,).
Configuration example
This configuration example uses the settings identified in the network diagram
shown on page 361.
IPCFG 10.1.1.2,255.255.0.0,10.1.1.10
APPMODCFG 0,SPARE,TSIDSP
APPMODCFG 1,E,G729,G729
APPMODCFG 2,NC,NC
APPMODCFG 3,NC,NC
APPMODCFG 4,1,1,E,1,1,5556987,60655569870101,E,1,1,
5556988,60655569880101
APPMODCFG 5,NC,NC
APPMODCFG 6,NC,NC
APPMODCFG 7,NC,NC
SYSCFG 2, Remote site 1
ROUCFG 13:00,0,JAN-13-2000,911,#222,#333,#345,#456,E
ACCFG N
370
9150 unit's IP interface information:
n IP address
n Subnet mask
n IP gateway
On-board DSP module (module 0)
and installed DSP application
module (module 1)
ISDN BRI module configuration
n module number
n PSTN number for each B-channel
n SPID for each B-channel
Unit ID and node name
System configuration:
n Emergency service number
n System date and time
n SPRE codes
Standard 2.0
Remote Office 9150