Nortel Remote Office 9150 Installation And Administration Manual page 253

September 2001
Field
Forward Busy/No
Answer: Number of
Rings before transfer
Forward Busy/No
Answer: Transfer to
DN
Disabled Outbound
Digit Sequence
Local Call Keys (Key
1 and Key 2)
Installation and Administration Guide
Description
Enter the number of times this station rings before transferring the
call to the configured DN. Default is four rings.
Enter the DN where calls to this station will be transferred if not
answered before the configured number of rings. This DN may be
for a voicemail service or the DN of another station.
If you want to prevent this station from making a certain type of
call, then enter the digits that normally allow that type of call to
proceed.
Example: Enter 1976 to prevent calls to 1-976 numbers.
Note: You can configure five digit sequences. In order for calls to
be restricted, the dialed number must contain a matching string at
the beginning of the number.
The number selected identifies the feature key position on the
telephone. Select the feature key you want to use for each local
call appearance key. Valid options are: 1-15. NC means not
configured.
Note: If the port is configured as local and remote, Key 0 is not
recommended. Keys 8 and 9 are recommended. You can select
Key 0 if the port is configured as local only.
Valid options: 0 through 15
Configuring the Remote Office 9150 unit
229