Nortel Remote Office 9150 Installation And Administration Manual page 359

September 2001
Symptom
CONFIG UPLOAD FAILED
attempting to perform a
configuration upload by TFTP.
(continued)
System not responding
appears when working with
Configuration Manager.
Nothing happens when attempting
to log off from the Remote Office
9150 unit.
Installation and Administration Guide
What to do
when 2 Ensure that the configuration file you are
attempting to upload is compatible with current
firmware.
Perform the configuration upload using a
previous configuration file, if necessary.
Note: Each time you perform a firmware
upgrade, you should also create a backup of the
configuration. The configuration database
format in the Remote Office 9150 unit is
dependent on the version of firmware installed.
If you recently downgraded to a previous
version of firmware, you might also need to
revert to a previous configuration format.
It is possible that communication has been lost
between the administration PC and the Remote
Office 9150 unit.
Close Configuration Manager, and then restart it.
It is possible that communication has been lost
between the administration PC and the node to
which you were logged on.
Close Configuration Manager, and then restart it.
Troubleshooting
335