Remote Office 9150 description
Online/offline table
The online/offline table is configured on the RLC and allows you to schedule
times
n
when the ISDN BRI connection to the host PBX is made available to the
Remote Office 9150 site
Note: When the Remote Office 9150 unit is in offline mode, users cannot
make or receive calls through the host PBX over the IP or PSTN.
n
when all telephones at the Remote Office 9150 site revert to normal
telephone service
This allows you to ensure that unwanted ISDN BRI telephone calls through the
host PBX are disabled after business hours.
How the table works
You can define up to eight entries per day, every day of the week, for each
remote site. You can define each entry as online, offline, or undefined for each
time period entered.
Users at the Remote Office 9150 site can override the settings of the online/
offline table, should the table attempt to suspend access to the host PBX in the
middle of a business call. Each user station at the remote site is alerted by a buzz
and a display message at 30, 20, and 10 seconds before the connection is
terminated. To override connection termination, the user must enter the online
SPRE (Special Prefix) code on the telephone.
Configuration
The online/offline table is configured for each remote site on the RLC. Refer to
the Reach Line Card Installation and Administration Guide
(NTP 555-8421-210) for configuration information.
For a description of how to go online or offline at the Remote Office 9150 site,
see Chapter 6, "Using Remote Office 9150 stations."
46
Standard 2.0
Remote Office 9150