Ifm5·1 Module - Deif AWC 500 Installation Instruction

AWC 500 Installation instruction
range. Please note that at altitudes above 2000 m the UL approval limits the input range to a
maximum of 520 V.
Input range:
Measure range:
Frequency:
Load max.:
Overload:
UL/cUL:
Terminals:
Cable:
4.3.3. Relay outputs/inputs
The GPM has two relay outputs as well as two digital input designed for potential-free contacts.
Relay output:
Terminals:
Cable:
4.4. IFM5·1 module
The Interface and Fieldbus Module offers:
• 2 x RS-485/422
• 2 x CAN
• 2 x SSI
Table 8. Run LED:Tri-coloured diode showing the EtherCAT state as well as Service state
State
Off
Blinking green (slow)
Blinking orange/red (slow)
Single Flash green (slow)
Single Flash orange/red
Solid green
Solid orange
Flickering green
Flickering orange/red
4.4.1. SSI power supply
The IFM module can be used to supply power to the connected SSI encoders.
Power input:
Device supply:
Terminals:
www.deifwindpower.com
0...690 V
40...100, 40...240 or 40...690 V
40...70 Hz
0.5 mA or 0.3 VA per phase
130 % of Un continuously, 200 % of Un for 10 s
Max 600V L-L
External fuse maximum 2 A slow-blow.
Spring cage plug-able connectors
2
0.2...1.5 mm single/multi-stranded wire
Rating: 24 V, maximum 1 A resistive
Screw connection
2
0.2...2.5 mm single/multi-stranded wire
Description
INIT or no power
Pre-operational
Pre-operational, and module selected
Safe-operational
Safe-operational, and module selected
Normal operational
Normal operational, and module selected
Boot loader
Boot loader, and module selected
18...36 V, max. 1 A
Maximum 100 mA per channel/device
Spring cage plug-able connectors
4.4. IFM5·1 module
Page 12 of 14