Configuring The Linux Dial Settings - Intermec CK1 User Manual

Chapter 4 — Communicating Through Modem and Null Modem Connections
9 Select Allow callers to access my local area network, select
Specify TCP/IP addresses, enter the range of IP addresses
that includes the IP address the dial-in users will use, and
click OK.
10 Click Next, and click Finish.
The dial in connection is created. You are now ready to send
information between the PC and the CK1.

Configuring the Linux Dial Settings

The following procedure explains how to set up the null modem
on a RedHat 7.2 Linux system and how to connect and
disconnect.
To configure the RedHat 7.2 Linux dial settings
1 Connect the CK1 to a COM port on your Linux system. For
help, see CK1 Serial Dock Quick Start Guide (P/N 073772).
2 On your Linux system, log in with root privileges.
3 Copy ppp_install.tgz to /usr/local:
host# cp
where host# is the host name with root privileges.
4 Unzip the file ppp_install.tgz:
host# cd
host# tar
CK1 Handheld Computer User's Manual
ppp_install.tgz /usr/local
/usr/local
xzvf ppp_install.tgz
85