Intermec CK1 User Manual page 69

Chapter 4 — Communicating Through Modem and Null Modem Connections
4 Select either Modem or null Modem. Select Modem if you
are communicating through the modem dock (P/N 073666).
Select null Modem if you are communicating through the
serial dock (P/N 073665).
a Press Space to open the Media drop-down list.
b Press
c Press Enter to close the drop-down list.
5 Press
6 Select the baud rate.
a Press Space to open the Baud drop-down list.
b Press
c Press Enter to close the drop-down list.
7 Press
from 0 to 6000 that you want the PPP server on the CK1 to
run before restarting.
8 If Server is enabled, press
clear the Lock area of the status bar, and enter the IP address
for the CK1 in the format n.n.n.n where n is a number from
0 to 255. If necessary, press
last character you want to keep and press Delete to clear the
characters you do not want.
9 If Server is enabled, press
clear the Lock area of the status bar, and enter the IP address
for the PC that the CK1 is communicating with in the format
n.n.n.n where n is a number from 0 to 255. If necessary, press
keep and press Delete to clear the characters you do not
want.
10 Press Enter to accept your changes and return to the System
Setting screen.
11 Save your changes and exit the System Setting screen. For
help, see "Saving Your Changes and Exiting the System
Setting Screen" on page 39.
58
or to select Modem or Null modem.
to select the Baud drop-down list
to select the baud rate: 9600, 19200, 38400,
57600, or 115200 bps.
to select Timeout, and enter the number of seconds
to move the highlight to the last character you want to
to select Host IP, press Lock to
to move the highlight to the
to select Peer IP, press Lock to
CK1 Handheld Computer User's Manual