Intermec CK1 User Manual page 108

7 Choose Serial Port > Connect. The DNW application is
now connected to the CK1. You are now ready to upgrade
the firmware.
To load the flash writer, NOR flash, and NAND flash
1 Copy your applications from the CK1 to the PC. For help,
see "Transferring Files From the CK1 to a PC" on page 102.
2 Place the CK1 in the serial dock, and turn off the CK1.
3 Press and hold 5, and turn on the CK1.
4 On the PC, press and hold Esc.
5 On the CK1, press F1 and then 2.
6 On the PC, release Esc. The DNW application window
displays the Bootloader menu.
Note: The Bootloader menu may look different depending
on what version of firmware is loaded on the CK1.
7 If the flash writer needs to be updated along with the NOR
and NAND flash, press 0 on the PC keyboard.
CK1 Handheld Computer User's Manual
Chapter 5 — Managing the CK1
97