Intermec CK1 User Manual page 55

Chapter 3 — Developing and Using Applications
To load an application or file on the CK1 using FTP
1 Configure the CK1 to communicate through a PPP
connection with your PC. For help, see "Configuring PPP
Communications" on page 57.
2 Connect the serial dock (P/N 073665) to your PC and to AC
power. For help, see the CK1 Serial Dock Quick Start Guide
(P/N 073772).
3 Place the CK1 in the serial dock.
4 Turn on the CK1.
5 On your PC, create and configure a null modem connection.
For help, see "Configuring Null Modem Settings" on page
72.
6 On your PC, use FTP to load the application and application
icon on the CK1 as a binary file transfer. For help, see the
documentation for your FTP software.
Note: The CK1 cannot communicate with an Internet
browser so you cannot use FTP through an Internet browser.
If prompted for a user name and password when creating the
FTP connection, type
password.
7 Exit FTP.
8 On the PC, create a Telnet connection with the CK1. For
help, see the documentation for your Telnet software.
If prompted for a user name and password when creating the
Telnet connection, type
password.
9 At the Telnet prompt, type:
vi .icondata.ini
You can now edit the .icondata.ini file using vi editor. For a
description of some of the vi editor commands, see the
following table, "Useful Vi Editor Commands."
44
as the user name and
ck1
as the user name and
ck1
CK1 Handheld Computer User's Manual
as the
agsy
as the
agsy