Rebooting The Ck1 - Intermec CK1 User Manual

Chapter 5 — Managing the CK1
2 Press
System Information screen appears.
3 Press
Firmware Version screen appears.
4 Press S1-Esc to return to the System Information screen.
To return to the Setup screen, press S1-Esc.

Rebooting the CK1

The following procedure explains how to reboot the CK1.
To reboot the CK1
1 Press and hold F1–2 until you are prompted for a user name
and password.
2 Enter the user name and password, and press Enter. The
default user name is
The CK1 boots and automatically runs the application
configured to automatically run or displays the Main screen.
94
to highlight the Info icon, and press Enter. The
Infos
SYSTEM INFORMATION
Memory
FW Ver
Disk
to highlight the FW Ver icon, and press Enter. The
Infos
BootLoader:
010200
Writer: 010200
BIOS: 010200
Diagnostic:
010200
kernel: 010200
rootfs: 010200
usrlocal:
010200
, and the default password is
ck1
CK1 Handheld Computer User's Manual
.
agsy