Managing Battery Power (continued)
Situation
You are going to store the CK1 for
more than a day.
You want to use the backlight for
extended periods of time.
You are working in a well lit area.
You can also check the status of the battery by going to the
Power screen in System Setting. For help, see "Managing Power
Output" on page 88.
Turning Off the Backup Battery
If you want to store the CK1 for longer than a month, you
should turn off the backup battery. If the CK1 keypad and
screen are not responding, you can turn off the backup battery
to perform a hard reset.
To turn off the backup battery
1 Remove the battery. For help, see "Removing the Battery" on
page 7.
2 Using a straightened paperclip, slide the backup battery
switch up.
CK1 Handheld Computer User's Manual
Chapter 1 — Learning About the CK1
Ways to Save Battery Power
Save your data and end your CK1
session to minimize the risk of data
loss. Turn off the CK1. Insert a fully
charged battery before you store the
CK1.
Set the backlight to Auto-off, and set
the timeout to 1 minute. For help, see
"Configuring the Screen" on page 25.
Avoid setting the backlight to Always
On.
Set the backlight to Always Off. For
help, see "Configuring the Screen" on
page 25.
9