Configuring The Audio Signal - Intermec CK1 User Manual

Configuring the Audio Signal

The following procedure explains how to configure:
• how loud the buzzer is.
• why the buzzer sounds.
To configure the audio signal
1 From the System Setting screen, press
Buzzer icon, and press Enter. The Buzzer screen appears.
2 Press
toward MIN to make the buzzer quieter or toward MAX to
make the buzzer louder. Every time you press
CK1 beeps at the volume you have selected.
3 Under Enable sounds for, press
key click, or system prompt check box.
4 Press Space to select or clear the check boxes.
5 Press Enter to accept your changes and return to the System
Setting screen.
6 Save your changes and exit the System Setting screen. For
help, see "Saving Your Changes and Exiting the System
Setting Screen" on page 39.
You can now configure other CK1 functions or run an
application.
CK1 Handheld Computer User's Manual
Setting
Buzzer
SYSTEM VOLUME
MIN MAX
Enable sounds for:
warning.
key click.
system prompt.
(warnings, system evens)
or to change the volume. Move the slide rule
Chapter 2 — Configuring the CK1
to highlight the
or , the
to move to the warning,
27