Intermec CK1 User Manual page 67

Chapter 4 — Communicating Through Modem and Null Modem Connections
6 In the Username field, enter up to 20 alphanumeric
characters for the user name that allows you access to the
Setup screen. The default user name is
7 Press
The password can be up to 20 alphanumeric and special
characters. The default password is
8 Press
including country and area code if needed.
9 Press
before hanging up. The timeout is in seconds.
10 Press Enter to start the connection.
11 Making sure that the Lock area is clear, press S1 and then the
Green key. The Setup screen appears.
12 Configure the Windows 2000 or Linux dial in settings. For
Windows 2000, see "Configuring the Windows Dial
Settings" on page 59. For Linux, see "Configuring the Linux
Dial Settings" on page 85.
To disconnect the phone connection
1 Open the Dial up screen. For help, see Steps 1 through 5 of
the previous procedure.
2 Press
3 Press Enter.
4 Making sure that the Lock area is clear, press S1 and then the
Green key. The Setup screen appears.
The CK1 is no longer communicating over the phone
connection.
56
, and enter the password to access the Setup screen.
, and enter the phone number for the connection
, and enter how long the CK1 should try to connect
until Disconnect is selected.
CK1 Handheld Computer User's Manual
.
ck1
.
agsy