Intermec CK1 User Manual page 37

Chapter 2 — Configuring the CK1
2 Under Backlight, press
off, or Auto-off after, and then press Space to select the
setting.
Note: Having the backlight always on decreases battery life.
3 If you select Auto-off after, press
the number of seconds the CK1 needs to be idle for the
backlight to turn off. The options are 5, 10, 20, 30, or 45
seconds.
4 Press
5 Press
toward MIN to brighten the screen or toward MAX to
darken the screen.
6 Press Enter to accept your changes and return to the System
Setting screen.
7 Save your changes and exit the System Setting screen. For
help, see "Saving Your Changes and Exiting the System
Setting Screen" on page 39.
You can now configure other CK1 functions or run an
application.
To turn on and off the backlight
• Press the Green key and then S2.
26
Setting
UG
SCREEN
Backlight
Always on.
Always off.
Auto-off after
5 10 20 30 45 seconds.
X
Brightness
MIN MAX
to move to Brightness.
or to set the brightness. Move the slide rule
CK1 Handheld Computer User's Manual
to highlight Always on, Always
and then to choose