Comtech EF Data CRS-311 Installation And Operation Manual page 92

CRS-311 1:1 Redundancy Switch
Modem, RMI/TMI, and Switch Configuration
Modem has address 0100, and the Redundant Modem uses address 1100. See Figure 4‐2 and
Appendix C. Addressing Scheme Information
Once the addressing scheme is understood, proceed as follows:
Step Task
Configure COMMs on each modem via the modem front panel menu as follows:
1
CONFIG
2 Set the EIA-485 base address and offset, per Appendix C. Addressing Scheme Information.
See the CDM‐Qx Installation and Operation Manual for detailed configuration information.
In this example, the EIA‐485 offset address does not affect Modem #1, so the offset
can be 1‐99 without affecting other Modem's EIA‐485 addresses.
REMOTE: RS-485-4W, 9600 baud, format 8-N-1.
Figure 4-2. CDM-Qx/QxL / CRS-311 EIA-485 Scheme
for more information.
4–4
Revision 7
MN/CRS311.IOM