CRS-311 1:1 Redundancy Switch
Front Panel Operation
EDIT SWITCH BUS ADDRESS:
3000
Available in RS‐485 mode. Use the ▲▼arrow keys to change the value of the address, and then
press ENTER. The only valid addresses, as explained in Chapter 6. SERIAL‐BASED REMOTE
PRODUCT MANAGEMENT, are 1000, 3000, 5000, and 7000.
5.2.2.5.2.3 (CONFIG: REMOTE
SELECT DATA FORMAT:
8-N-1
7-E-2
This setting does not affect the internal communications between the Switch and
the modems. For the SLM‐5650, this is fixed at RS‐232, 9600 baud, 8‐N‐1.
5.2.3 INFO (INFORMATION)
INFO:
S/N
IF-SWITCH
Use the ◄►arrow keys to select S/N, ID, SETUP, IF‐SWITCH, REMCONT, or MASK, and then
press ENTER. These screens provide read‐only information on the current configuration of the
Switch without risking inadvertent alterations.
5.2.3.1
(INFO:) S/N
Serial Number:
XXXXXXXXX
This screen displays the nine‐digit serial number unique to this CRS‐311 unit. Press CLEAR to
return to the previous menu.
5.2.3.2
(INFO:) ID
SWITCH ID:
-------------------------
This screen displays the user‐defined Switch ID string. Use the UTILITY: SW‐ID submenu to enter
or edit this information. Press ENTER or CLEAR to return to the previous menu.
(PRESS ENTER)
REMOTE) FORMAT
7-O-2
ID
SETUP
REMCONT
MASK
(CLEAR)
5–11
Revision 7
MN/CRS311.IOM